|
24 Port Gigabit SNMP Managed POE Switch with 4 Paired SFP/Copper PortsThe POEGEM24T4SFP features 24 PoE compliant ports running at 10/100/1000Mbps with 4 of the
10/100/1000Mbps Copper ports paired with mini‐GBIC (SFP) ports.
The POEGEM24T4SFP is designed for high port
density PoE applications such as VoIP phone deployment or IP security camera environments. The
Intelligent Layer 2 SNMP management features enable reliable transport of critical VoIP and Security
data, even in congested network environments. VoIP requires prioritisation of Voice Calls over
general Network Data and Security systems require not only prioritisation, but also port based link
security and reporting of link failures to intelligent SNMP applications. These and other intelligent
network features are all supported from the POEGEM24T4SFP switch.
All ports of the POEGEM24T4SFP support the IEEE 802.3af PoE standard for Power Injection (PSE).
This injects PoE power onto the Cat5e or above Cable when it detects the presence of a PoE
compliant device. When operating with non PoE devices the switch will shut down the power
injecting circuitry and as such not cause any damage to your network devices ‐ but still allow them to
run on the switch as in the case of a normal Ethernet device.
The POEGEM24T4SFP uses an injection voltage of about 48VDC on pins 1, 2, 3, 6
Intelligent Network features offer a complete management solution that can enable you to scale your
network from a single departmental switch right up to any Enterprise environment. STP, RSTP and
MSTP offer network redundancy features, IGMP snooping offers support for Streaming Video and
Multicasting images, Tagged VLAN offers logical security and management of nodes within defined
groups. QOS based on port priority queues and TOS bytes ensure efficient forwarding of critical
network data.
| 
Click to Enlarge Image
|
 Quick Download : User Manual
Product Features| | - 24x IEEE 802.3af complinat Gigabit POE Ports
- 4x Paied SFP Ports
- Programmable maximum Ethernet frame length from 1518 to 9600 bytes jumbo frame
- Web‐based management provides the ability to completely manage the switch from any web browser
- SNMP/Telnet interface delivers complete in‐band management
|
|
Product Specification| |
Transmission Mode
~ 10/100Mbps support full or half duplex
~ 1000Mbps support full duplex only
MAC Address and Self‐learning
~ 8K MAC address
~ 4K VLAN table entries,
Buffer Memory
~ Embedded 1392 KB frame buffer
Power Requirement
~ 100 ~ 240VAC 50/60Hz
Power Consumption
~ 30W - No POE load
~ 210W - Full POE load
Ambient Temperature
~ 0° to 40°C
Humidity
~ 5% to 90%
Dimensions
~ 44(H) × 442(W) × 209(D) mm
|
|
Ordering Information
| | | POEGEM24T4SFP | 24 Port Gigabit SNMP Managed POE Switch with 4 Paired SFP/Copper Ports | Where to Buy |
|
|