|
MVP210-SS - 2 Port FXO/FXS VOIP Gateway/SIP ServerThe MultiVOIP® SS survivable SIP gateway and server is ideal for small branch offices of large corporations that have deployed a distributed IP telephony network.
It functions as the primary or secondary SIP server for IP
phones used at the remote offices and renders local office survivability, in the case of a LAN or WAN failure, by
providing local, reliable PSTN trunking. The MultiVOIP SS gateway also provides local PSTN access for emergency
calls, such as 911, as well as normal inbound/outbound local calling. In addition, the gateway functions as an
analog telephone adapter (ATA), adapting analog phones and fax machines to IP environments.
| 
Click to Enlarge Image |
 Quick Download : Data Sheet
Product Features| | - 2, 4 or 8 analog ports for communication over an existing IP network or the Internet
- Supports SIP for sending voice over the Internet
- FXS/FXO/DID and E&M connectors on each channel for direct analog connection to phones, key telephones, PBX extensions, PSTN lines or PBX trunks
- Provides local office survivability in the event of a LAN/WAN failure
- Emergency transfer (power-out fail-over)
- PSTN trunking bridges the PSTN to the IP network for emergency calls as well as normal inbound/outbound calling*
- Multi-port ATA functionality for analog phones and fax machines
- Ethernet connectivity and full IP compatibility with existing routers and WAN infrastructure
- Voice compression to 5.3K bps per call with support for multiple algorithms, including ITU G.723 and G.729
- VAD and CNG support
- QoS via DiffServ or 802.1p
- T.38 real-time fax relay for interoperability among other VOIP equipment
- Supports SIP supplementary services including call forward, call transfer, and call hold
- Adaptive echo cancellation, forward error correction and dynamic jitter buffers
- Configuration and management using a Web browser or Windows
- Built-in modem for remote out-of-band management (4 and 8 port models)
|
|
Product Specification| |
Analog Ports
~ Number of Ports: 2, 4 or 8
~ Port Interface: FXS, FXO, DID, & E&M on each port
~ FXS Interface: KTS, telephone set, or fax; ground & loop start
~ FXO Interface: PBX station; CO line, loop start, 2-wire
~ DID Service Types: Wink-start; immediate-start; delay dial
~ DID Signaling Type: DTMF
~ DID Operational Mode: Dial Pulse Originating (DPO)
~ E&M Interface: PBX E&M trunk; 2- or 4-wire
~ E&M Signal Types: I through V
~ Dialling: DTMF or pulse
~ Connectors: 1 RJ-48 (E&M); 1 RJ-11 (programmable FXS, FXO or DID) per port
LAN Port
~ Format: Ethernet/Ethernet II or SNAP
~ Interface: 10/100Base-T
Command Port
~ 2-Port Interface: RS-232C/D; RJ-45
~ 4 & 8-port Interface: RS-232C/D; DB25
~ Speed & Format: 115.2K bps asynchronous
Protocols
~ SIP, RTP, RTCP, SMTP, Q.931, T.38 & Group 3 Fax relay, DTMF out-of-band (RFC 2833)
Bandwidth Management
~ G.711, G.723, G.726, G.727, G.729 & proprietary voice compression, silence suppression, VAD, CNG
Voice Quality
~ DiffServ, 802.1p, G.165, G.168, adaptive echo cancellation, forward error correction, bad frame interpolation, tunable latency, dynamic jitter buffers
Management
~ Web browser, Windows, flash upgradeable
Power
~ Voltage & Frequency: 115V/240VAC, 47/60 Hz
~ Power Consumption: 2-Port Model: 19W, 4 & 8-Port Models: 46W
Dimensions
~ 2-Port Model: 6.2" w x 1.4" h x 9.0" d; 2 lbs. (15.7 cm x 3.6 cm x 22.9 cm; 0.91 kg)
~ 4-Port & 8-Port Models: 17.4" w x 3.8" h x 8.0" d; 7.4 lbs. (44.2 cm x 9.6 cm x 20.3 cm; 3.4 kg)
Certification
~ EMC: FCC Part 15 Class A, EN 55022, EN 55024, EN 61000-3-2, EN 61000-3-3
~ Safety: CE, UL 60950, EN 60950, cUL, ACA TS-001
~ Telecom: FCC Part 68, CS-03, TBR21, ACA TS-031, TBR3
|
|
Ordering Information
Other Product Resources Multi-Tech Strategic Alliances
Approved plaform for Panasonic Advanced Hybrid and Digital Super Hybrid Telephone Systems
|