|
FXS/Line to VoIP Multicast Paging GatewayThe CyberData FXS/Line to VoIP Multicast Paging Gateway takes either Line Level Audio in or analogue extension (FXS) from a PBX FXO port and converts this to Multicast VoIP for Paging. It enables definition of up to 99 multicast paging zones.
Configuration of Zones, and their Multicast addresses are defined through an easy to use web-based configuration. The device connects via a single cable to a standard PoE 802.3af compliant switch.
The FXS interface is easily connected to any PBX FXO Trunk port for direct Extension to Multicast Paging, or alternatively connect it via a Line Level Audio Input - Radio receiver for example - for paging of radio or other audio sources.
| 
Click to Enlarge Image |
 Quick Download : 010972 Datasheet
Product Features| | - SIP RFC 3261 compatible
- PoE 802.3af enabled (Power over Ethernet)
- Dual-speed Ethernet 10/100 Mbps
- DTMF control of zone selection
- Multicast output
- Web-based configuration and Firmware
- Connector for external power supply
- IGMP
|
|
Product Specification| |
Audio Inputs
~ FXS analogue Extension input. (from FXO on PBX)
~ Line Level Audio Input
Ethernet Output
~ Ethernet Interface: 10Base-TX (RJ-45)
~ Protocol: SIP RFC 3261 Compatible
~ Payload Types: G.711 Multicast
Other
~ Regulatory Compliance: FCC Class B, UL 60950, CE
~ Dimensions: 155.2mm(W) x 102.9mm(D) x 29.2mm(H) (6.11” x 4.05” x 1.15”)
~ Power Input: PoE 802.3af compliant or 48VDC
|
|
Ordering Information
|